Protoboard Assembly

Tools required:

  • Long Nose Pliers


    • If the binding posts that came with the protoboard is very tight, use a bench vise or another plier to loosen the holding nut.
     

    Use the appropriate color binding posts as shown below. Use black binding post for ground.

     

    Close-up of binding posts from top

    Close-up of binding posts from bottom.


    Last edited 1/14/00
     

    ImageMap - Better use Netscape 2.0+

    EE Home Page

    ©University of Pennsylvania, Department of Electrical Engineering.
    This site maintained and administered by Siddharth Deliwala, (deliwala@ee.upenn.edu)