Penn Engineering Homeline
    
ESE Undergraduate Labs
   
arrow General
  Introductory information
spacer spacer
arrow Schedule
  Hours of Operation
Closing Information
Test
spacer spacer
arrow Courses
  Undergraduate courses using the ESE labs
spacer spacer
arrow Instruments
  Devices available in the labs
spacer spacer
arrow Components
  Parts and tools used in the labs
spacer spacer
arrow Datasheets
  Detailed information for lab parts
spacer spacer
arrow PC-Based Hardware
  Data acquisition boards, 6811 boards, board setup...
spacer spacer
arrow Software
  Analog and digital programs, used with the laboratory tools...
spacer spacer
arrow Tutorials
  Learn how to use the hardware
spacer spacer
arrow Links
  Useful links for students and staff
spacer spacer
arrow Staff
  Faculty and lab administrators
spacer spacer

 

 
ESE Undergraduate Labs
RCA LabdividerKetterer LabdividerUndergraduate Robotics LabspacerDolph Simmons Senior Design Labspacer
6811 EVB Board Setup

IMPORTANT :
If the 60 PIN ribbon cable is not setup properly makesure the red marker line on the cable is setup properly. Following is the closeup view of the patch cable connecting the terminal board and 6811 microprocessor board
1.

The red line marker should match on the GND side of the terminal board as shown above.
2.

Match the red marker on the ribbon cable to P1 on the microprocessor board.

 
Go to the Penn Home Page divider Contact Us divider SEAS divider ESE Department spacer spacer
 


University of Pennsylvania - School of Engineering & Applied Science
ESE Undergraduate Labs - 101 Moore Building - 200 South 33rd Street, Philadelphia, PA 19104

This page is maintained and administered by Siddharth M. Deliwala <deliwala_at_ee.upenn.edu>.